UFO Platter Backlight for any Numark PT01
Fits to all SOLIDCUTZ platter
Does not fit to the stock platter
LED Backlight Ring
PT01 USB 12V-5V Power converter cable (optional)
Easy solderless installation - drilling is necessary.
The LED backlight ring for any Numark PT01 by PortablismGear.
It has many RGB LEDs and therefore requires a separate power supply.
(Required: Powerbank with a min. of 6000 mAh, 2A output and 69,3 mm x 125,6 mm x 12 mm to fit it in the PT01 Battery compartment)
This can be ideally solved with a power bank that can also supply power to the PT01 at the same time.
The powerbank should have two USB ports, one with max. 1.3A to power up the PT01 with our USB 12V-5V power converter and one output with at least 2A to power up teh ring.
If you use the lighting sporadically, a charge will last much longer.
The power bank can be accommodated in the battery compartment. It is best to fix it with double-sided tape.
The delivery includes a remote control incl. 2025 button cell. This allows you to adjust the brightness, color and various lighting presets.
This mod makes your Numark PT01 or PT01 Scratch definitely to an eye-catcher.
NEVER DO POWER UP THE BACKLIGHT WITH ANOTHER POWER SUPPLY THEN A CLASSIC POWERBANK.